SKU: 008793
UPS
| Name | Description |
|---|---|
| Max Power | 300-1000 W |
| Apparent Power | 500-1000 VA |
| Topology | Line-Interactive |
| Output | 600 VA / 360 W |
| Output No of sockets | 2 × Schuko (Type F) |
| Waveform type | Simulated Sine Wave |
| Input voltage | 162–290 V AC |
| Output Voltage | 220 / 230 / 240 V AC, ±10% (Battery Mode) |
| Battery | 1 × 12 V / 7 Ah, Sealed Lead-Acid |
| Runtime | 19 min (25% load) / 6 min (50% load) |
| Power Supply | AC Mains, 50 / 60 Hz |
| Dimensions | 279 × 101 × 142 mm |
| Weight | 4.25 kg |
or 1 041 ֏ / month
FSP FP600 — 600VA / 360W Line-Interactive UPS
General Specifications
Device type: Uninterruptible Power Supply (UPS)
Brand: FSP
Model: FP600 (FP 600)
Series: FSP FP Series
UPS technology: Line-Interactive
Form factor: Desktop / Tower
Phase: Single-Phase
Rated capacity: 600 VA (0.6 kVA)
Maximum output power: 360 W
Output power factor: 0.6
Output waveform: Simulated Sine Wave
Input Specifications
Nominal input voltage: 220 / 230 / 240 V AC
Input voltage operating range: 162–290 V AC
Input frequency: 50 / 60 Hz (Auto Sensing)
Automatic Voltage Regulation (AVR): Supported
AVR modes: Boost / Buck
Input connection: AC Power Cord
Output Specifications
Nominal output voltage: 220 / 230 / 240 V AC
Output voltage regulation in battery mode: ±10%
Output frequency in battery mode: 50 / 60 Hz ±1 Hz
Output waveform in battery mode: Simulated Sine Wave
Typical transfer time: 2–6 ms
Number of output sockets: 2
Socket type: Schuko (Type F)
Battery backup outlets: 2
Battery Specifications
Battery type: Sealed Lead-Acid (SLA)
Battery configuration: 1 × 12 V / 7 Ah
Battery voltage: 12 V DC
Battery capacity: 7 Ah
Nominal battery energy: 84 Wh
Battery location: Internal
Battery included: Yes
Typical recharge time: Approximately 4 hours to 90% capacity
Automatic battery charging: Supported
Off-Mode Charging: Supported
Cold Start: Supported
Battery Runtime
25% load (90 W): Approximately 19 minutes
50% load (180 W): Approximately 6 minutes
75% load (270 W): Approximately 0.5 minutes
100% load (360 W): Approximately 0.08 minutes
Runtime figures are average reference values. Actual backup time depends on connected load, battery condition and operating temperature.
Protection and Features
Line-Interactive Power Protection
Automatic Voltage Regulation (AVR)
Boost and Buck Voltage Stabilization
Battery Backup During Power Outages
Surge and Spike Protection
Automatic Restart After Power Restoration
Off-Mode Battery Charging
Cold Start Function
Overload Protection
Battery Over-Discharge Protection
Battery Overcharge Protection
Microprocessor-Controlled Operation
Generator Compatibility: Optional Configuration
Indicators and Controls
LED Status Indicator: Yes
Audible Alarm: Yes
Power On/Off Button: Yes
LCD Display: No
LED indications:
AC Mode: Solid Green
Battery Mode: Flashing Green
Audible alarms:
Battery Mode: Every 10 seconds
Low Battery: Every 1 second
Overload: Every 0.5 seconds
Fault: Continuous Alarm
Interfaces and Management
USB Communication Port: Optional, depending on configuration
Network Surge Protection: Optional, depending on configuration
Ethernet Data Interface: Not provided as a standard networking function
Physical Specifications
Color: Black
Installation: Desktop / Tower
Design: Compact
Cooling: Air Ventilation
Dimensions (D × W × H): 279 × 101 × 142 mm
Net Weight: 4.25 kg
Noise Level: Less than 40 dB
Operating Conditions
Operating Temperature: 0 to +40 °C
Operating Humidity: 0–90% RH, non-condensing
Recommended Installation: Indoor Use
Standards and Certifications
CE
Package Contents
FSP FP600 UPS
1 × Installed 12 V / 7 Ah Battery
Quick Start Guide
Copyright © 2026 ITPlaza. All Rights Reserved