In stock

Cudy GS1010P 8-port Gigabit poe+ 2port Gigabit uplink 120W Unmanaged Switch

SKU: 009075

Network switches

Features

Name Description
Number of RJ45 Ports 8
Ethernet Port Speed Gigabit Ethernet
Management Type Unmanaged
PoE Support No, IEEE 802.3af PoE+
Uplink Ports Gigabit RJ45

MAC Addresses 2048
Jumbo Frames 16 KB
Power supply (W) 120 W, Built-In, 100–240 V AC
Dimensions 200 × 118 × 44 mm
19 270 ֏

or 1 019 ֏ / month

← Back to «Network switches»

  • Cudy GS1010P — 8-Port Gigabit PoE+ Switch with 2 Gigabit Uplink Ports
  • Device type: Gigabit PoE+ Ethernet Switch
  • Model: GS1010P
  • Hardware version: GS1010P 4.0 / 4.1
  • Management: Unmanaged
  • Total RJ45 ports: 10
  • PoE ports: 8
  • Dedicated uplink ports: 2 × Gigabit RJ45
  • Ethernet Ports
  • Ports 1–8: 10/100/1000 Mbps Gigabit RJ45 with PoE+
  • Uplink ports: 2 × 10/100/1000 Mbps Gigabit RJ45
  • All ten Ethernet interfaces support Gigabit Ethernet. There are no SFP or SFP+ interfaces.
  • PoE
  • PoE ports: Ports 1–8
  • PoE standards: IEEE 802.3af / IEEE 802.3at
  • PoE type: Mode A
  • Maximum output per PoE port: 30 W
  • Suitable for compatible IP cameras, access points, VoIP phones and other IEEE 802.3af/at powered devices.
  • Intelligent Power Management: supported. If the available power limit is exceeded, the switch can disconnect the most recently powered device.
  • Operating Modes
  • Default Mode: normal Ethernet switching
  • VLAN Mode: isolates downlink ports from one another while allowing communication with uplink devices.
  • Extend Mode: extends Ethernet/PoE transmission up to 250 m using Cat.5e or better cable by limiting port speed to 10 Mbps.
  • PoE Watchdog: monitors PoE clients and can restart a PoE port if the connected device remains inactive for approximately five minutes.
  • Performance
  • Switching capacity: 20 Gbps
  • Forwarding rate: 14.88 Mpps
  • MAC address table: 2048 entries
  • Packet buffer: 1 Mbit
  • Jumbo Frame: 16 KB
  • Ethernet standards:
  • IEEE 802.3i — 10BASE-T
  • IEEE 802.3u — 100BASE-TX
  • IEEE 802.3ab — 1000BASE-T
  • IEEE 802.3x — Flow Control
  • IEEE 802.3af — PoE
  • IEEE 802.3at — PoE+.
  • Power
  • Power input: 100–240 V AC, 50/60 Hz
  • Power supply: 120 W, built-in
  • Maximum switch consumption excluding PoE: 10 W
  • Power connector: AC inlet
  • Grounding: three-prong plug and grounding point.
  • Construction
  • Housing: Metal
  • Cooling: Fanless / silent cooling
  • Installation: Desktop / Wall-Mount
  • Dimensions: 200 × 118 × 44 mm
  • Weight: 736.4 g
  • Surge protection:
  • Power: DM 2 kV / CM 4 kV
  • RJ45: CM 4 kV
  • ESD protection:
  • Contact: 6 kV
  • Air: 8 kV.
  • Environment
  • Operating temperature: 0 to +40 °C
  • Storage temperature: −40 to +70 °C
  • Operating humidity: 10–90% non-condensing
  • Storage humidity: 10–95% non-condensing
  • Package Contents
  • Cudy GS1010P
  • Power Cord
  • Installation Guide

Products in «Network switches»