This Kingston 2GB DDR3 1066MHz, PC3-8500 SO DIMM CL7 FBGA Notebook or Laptop memory module includes 1 module for a total of 2GB

Designed with the whitebox user and system integrator in mind, Kingston ValueRAM products are engineered to meet industry standard specifications and rigorously tested to ensure quality. Kingston ValueRAM is ideal for those who purchase memory by spec and are looking for competitvely priced generic memory that is 100-percent tested to meet industry specifications.

KVR1066D3S7/2G
2GB 256M x 64-Bit PC3-8500
CL7 204-Pin SODIMM
Kingston.com Document No. VALUERAM0667-001.A00 06/22/08 Page 1
DESCRIPTION
This document describes ValueRAM’s 256M x 64-bit 2GB
(2048MB) DDR3-1066 CL7 SDRAM (Synchronous DRAM)
memory module, based on sixteen 128M x 8-bit DDR3-1066
FBGA components. The SPD is programmed to JEDEC
standard latency 1066Mhz timing of 7-7-7 at 1.5V. This 204-
pin SODIMM uses gold contact fingers and requires +1.5V.
The electrical and mechanical specifications are as follows:
FEATURES
• JEDEC standard 1.5V ± 0.075V Power Supply
• VDDQ = 1.5V ± 0.075V
• 533MHz fCK for 1066Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 6,7,8,9
• Posted CAS
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• Programmable CAS Write Latency(CWL) = 7(DDR3-1066)
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does
not allow seamless read or write [either on the fly using A12
or MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE ≤ 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), double sided component